mopko.blogg.se

Show Displays information about controller(s), unit(s) and port(s).įlush Flush write cache data to units in the system. All rights reserved.įocus Changes from one object to another. This command writes the log entries to a file.Įxample: arcconf getlogs 1 device tabular > device.logĬopyright(c) 2004-2006 Applied Micro Circuits Corporation(AMCC). Tabular: Displays the log in table format.Ĭlear: Deletes the specified controller protocol.Īrcconf getlogs controller-number device ¦ dead ¦ event > DATEINAME.log You can also specify the following parameters: You can use the following parameters to specify the type of log entries displayed:Įxample: arcconf getlogs 1 device tabularĭEVICE: Shows all log entries with errors the controller could detect on all connected devices.ĭEAD: Shows all log entries where device and disk failures were recorded.ĮVENT: Shows all log entries with information about special events (e.g. Use this command to display the log entries. Use this command to display information about the existing hard disks.Īrcconf getlogscontroller-number device ¦ dead ¦ event

This command displays information about the RAID controller, configuration, RAID arrays, available disks and their current state. Use the following commands to view detailed information about the Adaptec RAID controller and configuration: The Adaptec RAID controller is managed with the arcconf command line tool.